/etc/sensors3.conf

This topic was published by and viewed 741 times since "". The last page revision was "".

Viewing 1 post (of 1 total)
  • Author
    Posts
  • DevynCJohnson
    DevynCJohnson
    Keymaster
    • Topics - 444
    • @devyncjohnson

    On Linux -

    # libsensors configuration file
    # -----------------------------
    #
    # This default configuration file only includes statements which do not
    # differ from one mainboard to the next. Only label, compute and set
    # statements for internal voltage and temperature sensors are included.
    #
    # In general, local changes should not be added to this file, but rather
    # placed in custom configuration files located in /etc/sensors.d. This
    # approach makes further updates much easier.
    #
    # Such custom configuration files for specific mainboards can be found at
    # http://www.lm-sensors.org/wiki/Configurations
    #
    # It is recommended not to modify this file, but to drop your local
    # changes in /etc/sensors.d/. File with names that start with a dot
    # are ignored.
    chip "lm78-*" "lm79-*" "lm80-*" "lm96080-*"
        label temp1 "M/B Temp"
    chip "w83792d-*"
        label in0 "VcoreA"
        label in1 "VcoreB"
        label in6 "+5V"
        label in7 "5VSB"
        label in8 "Vbat"
        set in6_min  5.0 * 0.90
        set in6_max  5.0 * 1.10
        set in7_min  5.0 * 0.90
        set in7_max  5.0 * 1.10
        set in8_min  3.0 * 0.90
        set in8_max  3.0 * 1.10
    chip "w83793-*"
        label in0 "VcoreA"
        label in1 "VcoreB"
        label in7 "+5V"
        label in8 "5VSB"
        label in9 "Vbat"
        set in7_min  5.0 * 0.90
        set in7_max  5.0 * 1.10
        set in8_min  5.0 * 0.90
        set in8_max  5.0 * 1.10
        set in9_min  3.0 * 0.90
        set in9_max  3.0 * 1.10
    chip "w83795g-*" "w83795adg-*"
        label in12 "+3.3V"
        label in13 "3VSB"
        label in14 "Vbat"
        set in12_min  3.3 * 0.90
        set in12_max  3.3 * 1.10
        set in13_min  3.3 * 0.90
        set in13_max  3.3 * 1.10
        set in14_min  3.0 * 0.90
        set in14_max  3.3 * 1.10
    chip "via686a-*"
        label in0 "Vcore"
        label in2 "+3.3V"
        label in3 "+5V"
        label in4 "+12V"
        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
        set in4_min 12.0 * 0.90
        set in4_max 12.0 * 1.10
    chip "adm1025-*" "ne1619-*"
        label in1 "Vcore"
        label in2 "+3.3V"
        label in3 "+5V"
        label in4 "+12V"
        label in5 "VCC"
        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
        set in5_min  3.3 * 0.90
        set in5_max  3.3 * 1.10
    # Depending on how your chip is hardwired, you may or may not have
    # +12V readings.
    #    set in4_min 12.0 * 0.90
    #    set in4_max 12.0 * 1.10
        label temp1 "CPU Temp"
        label temp2 "M/B Temp"
    chip "lm87-*" "adm1024-*"
        label in1 "Vcore"
        label in2 "+3.3V"
        label in3 "+5V"
        label in4 "+12V"
        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
        set in4_min 12.0 * 0.90
        set in4_max 12.0 * 1.10
        label temp1 "M/B Temp"
        label temp2 "CPU Temp"
    chip "it87-*" "it8712-*" "it8716-*" "it8718-*" "it8720-*"
        label in8 "Vbat"
    chip "fscpos-*" "fscher-*"
    #FSC "Hermes"
        label in0 "+12V"
        label in1 "+5V"
        label in2 "Vbat"
        label temp1 "CPU Temp"
        label temp2 "M/B Temp"
        label temp3 "Aux Temp"
    chip "fscscy-*"
    #FSC "Scylla"
        label in0 "+12V"
        label in1 "+5V"
        label in2 "+3.3V"
        label temp1 "CPU0 Temp"
        label temp2 "CPU1 Temp"
        label temp3 "M/B Temp"
        label temp4 "Aux Temp"
    chip "fschds-*"
    # Fujitsu Technology Solutions, "Hades"-Chip
    # Temperatures
        label temp1 "CPU Temp"
        label temp2 "Super I/O Temp"
        label temp3 "System Temp"
    # Fans
        label fan1 "PSU Fan"
        label fan2 "CPU Fan"
        label fan3 "System FAN2"
        label fan4 "System FAN3"
        label fan5 "System FAN4"
    # Voltages
        label in0 "+12V"
        label in1 "+5V"
        label in2 "Vbat"
    chip "fscsyl-*"
    # Fujitsu Technology Solutions, "Syleus"-Chip
    # Temperatures
        label temp1 "CPU Temp"
        label temp4 "Super I/O Temp"
        label temp5 "Northbridge Temp"
    # Fans
        label fan1 "CPU Fan"
        label fan2 "System FAN2"
        label fan3 "System FAN3"
        label fan4 "System FAN4"
        label fan7 "PSU Fan"
    # Voltages
        label in0 "+12V"
        label in1 "+5V"
        label in2 "Vbat"
        label in3 "+3.3V"
        label in5 "+3.3V-Aux"
    chip "vt1211-*"
        label in5 "+3.3V"
        label temp2 "SIO Temp"
    chip "vt8231-*"
        label in5 "+3.3V"
    chip "smsc47m192-*"
        label in1 "Vcore"
        label in2 "+3.3V"
        label in3 "+5V"
        label in4 "+12V"
        label in5 "VCC"
        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
        set in4_min 12.0 * 0.90
        set in4_max 12.0 * 1.10
        set in5_min  3.3 * 0.90
        set in5_max  3.3 * 1.10
        label temp1 "SIO Temp"
    chip "lm85-*" "lm85b-*" "lm85c-*" "adm1027-*" "adt7463-*" "adt7468-*" \
         "emc6d100-*" "emc6d102-*" "emc6d103-*" "emc6d103s-*" 
        label in1 "Vcore"
        label in2 "+3.3V"
        label in3 "+5V"
        label in4 "+12V"
        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
    # Depending on how your chip is hardwired, you may or may not have
    # +12V readings.
    #    set in4_min 12.0 * 0.90
    #    set in4_max 12.0 * 1.10
        label temp2 "M/B Temp"
    chip "emc6w201-*"
        label in2 "+3.3V"
        label in3 "+5V"
        label temp6 "M/B Temp"
    chip "pc87365-*" "pc87366-*"
    # Voltage inputs
        label in7 "3VSB"
        label in8 "VDD"
        label in9 "Vbat"
        label in10 "AVDD"
        compute in7   @*2, @/2
        compute in8   @*2, @/2
        compute in10  @*2, @/2
    # These are the operating conditions as recommended by National
    # Semiconductor
        set in7_min   3.0
        set in7_max   3.6
        set in8_min   3.0
        set in8_max   3.6
        set in10_min  3.0
        set in10_max  3.6
    # Depending on the hardware setup, the battery voltage may or may not
    # be monitored.
    #    set in9_min   2.4
    #    set in9_max   3.6
        label temp3 "SIO Temp"
        set temp3_min    0
        set temp3_max   70
        set temp3_crit  85
    chip "adm1030-*" "adm1031-*"
        label temp1 "M/B Temp"
    chip "w83627thf-*"
        label in3 "+5V"
        label in7 "5VSB"
        label in8 "Vbat"
        # Internal resistors
        compute in3  @ * (1 + 34/51), @ / (1 + 34/51)
        compute in7  @ * (1 + 34/51), @ / (1 + 34/51)
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
        set in7_min  5.0 * 0.90
        set in7_max  5.0 * 1.10
    # The battery voltage may or may not be monitored.
    #    set in8_min  3.0 * 0.90
    #    set in8_max  3.0 * 1.10
    chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*"
        label in0 "Vcore"
        label in2 "AVCC"
        label in3 "+3.3V"
        label in7 "3VSB"
        label in8 "Vbat"
        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  3.3 * 0.90
        set in3_max  3.3 * 1.10
        set in7_min  3.3 * 0.90
        set in7_max  3.3 * 1.10
        set in8_min  3.0 * 0.90
        set in8_max  3.3 * 1.10
    chip "w83627uhg-*"
        label in2 "AVCC"
        label in3 "+5V"
        label in7 "5VSB"
        label in8 "Vbat"
        set in2_min  5.0 * 0.90
        set in2_max  5.0 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
        set in7_min  5.0 * 0.90
        set in7_max  5.0 * 1.10
        set in8_min  3.0 * 0.90
        set in8_max  3.3 * 1.10
    chip "f71805f-*"
        label in0 "+3.3V"
        set in0_min  3.3 * 0.90
        set in0_max  3.3 * 1.10
    chip "f71872f-*"
        label in0 "+3.3V"
        label in9 "Vbat"
        label in10 "3VSB"
        set in0_min   3.3 * 0.90
        set in0_max   3.3 * 1.10
        set in9_min   3.0 * 0.90
        set in9_max   3.0 * 1.10
        set in10_min  3.3 * 0.90
        set in10_max  3.3 * 1.10
    chip "k8temp-*"
        label temp1 "Core0 Temp"
        label temp2 "Core0 Temp"
        label temp3 "Core1 Temp"
        label temp4 "Core1 Temp"
    chip "dme1737-*"
        label in0 "5VSB"
        label in1 "Vcore"
        label in2 "+3.3V"
        label in3 "+5V"
        label in4 "+12V"
        label in5 "3VSB"
        label in6 "Vbat"
        label temp2 "SIO Temp"
        set in0_min  5.0 * 0.90
        set in0_max  5.0 * 1.10
        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
        set in4_min 12.0 * 0.90
        set in4_max 12.0 * 1.10
        set in5_min  3.3 * 0.90
        set in5_max  3.3 * 1.10
        set in6_min  3.0 * 0.90
        set in6_max  3.0 * 1.10
    chip "sch311x-*"
        label in1 "Vcore"
        label in2 "+3.3V"
        label in3 "+5V"
        label in4 "+12V"
        label in5 "3VSB"
        label in6 "Vbat"
        label temp2 "SIO Temp"
        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
        set in4_min 12.0 * 0.90
        set in4_max 12.0 * 1.10
        set in5_min  3.3 * 0.90
        set in5_max  3.3 * 1.10
        set in6_min  3.0 * 0.90
        set in6_max  3.0 * 1.10
    chip "sch5027-*"
        label in0 "5VSB"
        label in1 "Vcore"
        label in2 "+3.3V"
        label in5 "3VSB"
        label in6 "Vbat"
        label temp2 "SIO Temp"
        set in0_min  5.0 * 0.90
        set in0_max  5.0 * 1.10
        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in5_min  3.3 * 0.90
        set in5_max  3.3 * 1.10
        set in6_min  3.0 * 0.90
        set in6_max  3.0 * 1.10
    chip "sch5127-*"
        label in2 "+3.3V"
        label in5 "3VSB"
        label in6 "Vbat"
        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in5_min  3.3 * 0.90
        set in5_max  3.3 * 1.10
        set in6_min  3.0 * 0.90
        set in6_max  3.0 * 1.10
    chip "f71808e-*" "f71808a-*" "f71862fg-*" "f71869-*" "f71869a-*" "f71882fg-*" \
         "f71889fg-*" "f71889ed-*" "f71889a-*"
        label in0 "+3.3V"
        label in7 "3VSB"
        label in8 "Vbat"
        compute in0  @*2, @/2
        compute in7  @*2, @/2
        compute in8  @*2, @/2
    chip "f71858fg-*" "f8000-*"
        label in0 "+3.3V"
        label in1 "3VSB"
        label in2 "Vbat"
        compute in0  @*2, @/2
        compute in1  @*2, @/2
        compute in2  @*2, @/2
    chip "f81865f-*"
        label in0 "+3.3V"
        label in5 "3VSB"
        label in6 "Vbat"
        compute in0  @*2, @/2
        compute in5  @*2, @/2
        compute in6  @*2, @/2
    chip "adt7473-*" "adt7475-*"
        label in2 "+3.3V"
        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        label temp2 "Board Temp"
    chip "adt7476-*" "adt7490-*"
        label in1 "Vcore"
        label in2 "+3.3V"
        label in3 "+5V"
        label in4 "+12V"
        set in2_min  3.3 * 0.90
        set in2_max  3.3 * 1.10
        set in3_min  5.0 * 0.90
        set in3_max  5.0 * 1.10
    # Depending on how your ADT7476 is hardwired, you may or may not have
    # +12V readings.
    #    set in4_min 12.0 * 0.90
    #    set in4_max 12.0 * 1.10
        label temp2 "M/B Temp"
Viewing 1 post (of 1 total)